&#;Rongxing Graphite Electrode Advantages&#;
Please visit our website for more information on this topic.
High output, with an annual output of 80,000 tons.
Having vast inventory.
Timely delivery; guarantee delivery date.
Superior quality; solve customer problems in time, technical support.
Strict consumption control.
Low resistivity.
High temperature strength.
Good electrical conductivity.
Low thermal expansion coefficient.
Low ash.
Good thermal conductivity and electrical conductivity.
Dense and equal structure.
Good oxidation resistance.
High mechanical strength.
Proper machining capability.
Needle coke content accounts for 80%, raw materials imported from Japan and South Korea.
&#;Using Guide for Rongxing Group Graphite Electrode&#;
Being hard and brittle, artificial graphite electrode shall be specially handled. Proper operation may reduce the consumption and cost.
Zhongsheng contains other products and information you need, so please check it out.
A, Use special hoist tools to hoist graphite electrode. It is strictly forbidden to prize electrode ends up with crowbar. It must be handled with great care during transportation to avoid damage.
B, Graphite electrode must be kept away from being moistened or wetted by rain, snow and water, and must be kept dry. It must be dried in the furnace before use. The drying temperature in the furnace shall be less then 100&#;.The drying period shall be not less than 48 hours.
C, Not to be stored up near clay,slag etc.to avoid surface pollution and increasing resistivity.
D, Carefully checking before connection, make sure that the socked and nipple thread is not damaged, nipple pitch plug is in. Nipple screw shall not be damaged during lifting.
E, Blow the nipple and socket threads with compressed air.
F,Graphite electrode must be connected contacted closely and straightly.Use moment spanner for connecting electrode with suitable force.The gap between electrodes shall less than 0.4mm.
G, The holding device must hold the electrode tightly,good contact and no arc.Otherwise,the connecting area will get red and oxidized and thin,leading breakage.
H, Threaded portion of nipple socket shall not be damaged during hoisting by metal plug.Hoisting plug shall spin out and keep nipple socket clean.
I, Lifting device of electrode must move stably when moving electrode.carefully check the position of furnace cover after being repaired.To seal the cover with refractory to prevent up electrode from being oxidized by fire.
J, The holding device of electrode shall hold the electrode beyond the socket area.
For charging the furnace, the large scrap should be put at the bottom, the small one on the top, Charge material with low electric conductivity shall not been put on the top. In the course of melting, un-melted material shall be taken in time to avoid electrode breaking by falling material.
If you are looking for more details, kindly visit Uhp Graphite Electrode.