Inconel 600 Pipe | Alloy 600 uns n06600 seamless

06 May.,2024

 

Inconel 600 Pipe | Alloy 600 uns n06600 seamless

Inconel 600 Pipe

Inconel 600 Pipe
Inconel 600 Welded Pipe
Inconel 600 Seamless Pipe

Inconel 600 Pipe Specification

For gas service, better results can be obtained by using Alloy 600 Pipe well below this maximum hardness.

Are you interested in learning more about nickel alloy 601 pipe and tubing wholesale? Contact us today to secure an expert consultation!

Pipe Material General Application Recommended Temperature Range Inconel Alloy 600 Pipe Recommended for High Temperature Applications with Generally Corrosive Media - -205°F to 1200°F (-130°C to 650°C)
Material Type ASTM Pipe Specifications Condition Max. Recommended Hardness Inconel Alloy 600 Pipe
Inconel 600 Pipe 600 ASTM B-167 Fully Annealed 90 Rb
Specifications ASTM B 167 ASME SB 167 / ASTM B 829 ASME SB 829 / ASTM B 517 ASME SB 517 Inconel 600 Seamless Pipe size 4 to 219mm W. T.: 0.5 to 20mm Inconel 600 Welded Pipe size 5.0 mm – 1219.2 mm Inconel 600 EFW Pipe size 5.0 mm – 1219.2 mm Specialized in Large Diameter Size Alloy 600 Pipe Schedule SCH5, SCH10, SCH40, STD, SCH80, SCH160 Inconel Alloy 600 Pipe Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF Inconel 600 Pipe Form Round, Square, Hollow, Rectangular, Hydraulic, Straight Pipes Etc. Alloy 600 Pipe Length Single Random, Double Random & Cut Length. End Plain End, Beveled End, Treaded. Marking All Inconel Alloy 600 Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) Material Test Certificates (MTC) Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 Manufacturers of Inconel 600 Pipe
  • Inconel 600 Pipe make Sumitomo Metals, Japan
  • Inconel 600 Pipe make Nippon Steel Corporation, Japan
  • Alloy 600 Pipe make Kobe Special Tube, Japan
  • Inconel 600 Pipe make Sanyo Special Steel, Japan
  • Inconel 600 Pipe make Tubacex Tubos Inoxidables S.A., Spain
  • Alloy 600 Pipe make Schoeller Bleckmann, Austria
  • Alloy 600 Seamless Pipe make Seah Steel Corporation, Korea
We can also cut, thread, and groove Inconel 600 Pipes to meet your specifications. Types Out diameter Wall thickness Length NB Sizes (in stock) 1/8” ~ 8” SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 Upto 6 Meters Inconel 600 Seamless Pipe (Custom Sizes) 5.0mm ~ 203.2mm As per requirement Upto 6 Meters Inconel 600 Welded Pipe (in Stock + Custom Sizes) 5.0mm ~ 1219.2mm 1.0 ~ 15.0 mm Upto 6 Meters

Types of Inconel 600 Seamless & Welded Pipe

  • Inconel 600 Hollow Pipe
  • Alloy 600 Seamless Pipe
  • Inconel 600 Bush Hex Pipe
  • Inconel 600 Round Pipe
  • 600 Inconel Alloy Round Pipe
  • 600 Custom Inconel Pipe
  • 600 Inconel Alloy Custom Pipe
  • 600 Inconel Thick Wall Pipe
  • Inconel Alloy 600 Thick Wall Pipe
  • SCH40 Inconel 600 pipe
  • Alloy 600 flex pipe
  • 600 Inconel Alloy Polished Pipe
  • Inconel 600 Thin Wall Pipe
  • Inconel Alloy 600 Thin Wall Pipe
  • ASTM B167 Inconel Seamless Pipe
  • Alloy 600 Welded Pipe
  • ASTM B167 Inconel Round Pipe
  • ASTM B167 Inconel Custom Pipe
  • ASTM B167 Inconel Thick Wall Pipe
  • ASTM B167 Inconel Thin Wall Pipe
  • Inconel 600 Round Pipe
  • UNS N06600 Inconel clad pipe
  • UNS N06600 Inconel welded pipe
  • UNS N06600 600 Inconel lined pipe

Value Added services:

  • Hardness Test
  • Flattening Test
  • Pitting Resistance Test
  • Chemical Analysis – Spectro Analysis
  • Micro and MacroTest
  • Flaring Test
  • Intergranular Corrosion (IGC) Test
  • Mechanical Testing Such as Tensile of Area
  • Positive Material Identification – PMI Testing

ALLOY 600 Pipe Stock List

Alloy Product form Dimension ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed 1.5 x 0.25 mm NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed 2.0 x 0.5 mm ALLOY 600 (75 Ni/16 Cr) Pipe; seamless 3.0 x 0.4 mm ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, seamless 3.0 x 0.5 mm ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, seamless 4.0 x 0.25 mm ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed 4.0 x 0.5 mm ALLOY 600 (75 Ni/16 Cr) Pipe; seamless, annealed 4.0 x 1.0 mm ALLOY 600 (75 Ni/16 Cr) Pipe; seamless, cold drawn 4.5 x 0.5 mm ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed 5.0 x 0.5 mm ALLOY 600 (75 Ni/16 Cr) Pipe; annealed, seamless 5.0 x 1.0 mm ALLOY 600 (75 Ni/16 Cr) Pipe; seamless, hard drawn 5.0 x 1.0 mm ALLOY 600 (75 Ni/16 Cr) Pipe; seamless, annealed 6.0 x 0.5 mm NICKEL 600 (75 Ni/16 Cr) Pipe; on coil, seamless, annealed 6.0 x 1.0 mm ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed 6.0 x 1.0 mm ALLOY 600 (75 Ni/16 Cr) Pipe; hard drawn, seamless 6.0 x 1.5 mm ALLOY 600 (75 Ni/16 Cr) Pipe; seamless, annealed 6.35 x 1.63 mm (¼" x 0.064") ALLOY 600 (75 Ni/16 Cr) Pipe; seamless, seamless, annealed 8.0 x 1.0 mm ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, seamless 10.0 x 1.0 mm ALLOY 600 (75 Ni/16 Cr) Pipe; seamless 10.0 x 2.0 mm NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, pickled 12.7 x 1.7 mm (½" x 0.065") NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, annealed 13.72 x 1.65 mm (¼"nb Sch10s) NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, cold drawn, pickled, annealed 14.0 x 3.0 mm NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, pickled 15.0 x 1.5 mm NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed 15.8 x 1.7 mm (5/8" x 0.065") NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, pickled 18.0 x 2.0 mm NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 21.34 x 1.65 mm (½"nb Sch5) NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 21.34 x 2.11 mm (½"nb Sch10s) ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, pickled 21.34 x 2.77 mm (½"nb sch40s) ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, pickled, seamless 25.4 x 1.65 mm (1" x 0.065") NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed, pickled 26.67 x 2.11 mm (¾"nb Sch10s) NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, pickled 26.67 x 2.87 mm (¾"nb sch40s) NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 26.67 x 3.91 mm (¾"nb Sch80s) NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, pickled 30.0 x 2.5 mm NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, pickled, annealed 33.4 x 2.77 mm (1"nb Sch10s) NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed, pickled 33.4 x 3.38 mm (1"nb Sch40s) NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 33.4 x 4.55 mm (1"nb Sch80s) NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, pickled, annealed 42.16 x 1.65 mm (1¼"nb sch5s) NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed, pickled 42.16 x 3.56 mm (1¼"nb Sch40s) ALLOY 600 (75 Ni/16 Cr) Pipe; cold finished, seamless, annealed 48.26 x 2.77 mm (1½"nb Sch10s) ALLOY 600 (75 Ni/16 Cr) Pipe; cold finished, seamless, annealed 48.26 x 3.68 mm (1½"nb Sch40s) NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, cold drawn, annealed, pickled 53.5 x 3.0 mm NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 60.33 x 2.77 mm (2"nb sch10s) NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 60.33 x 3.91 mm (2"nb sch40s) NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, cold drawn, pickled, annealed 66.0 x 4.0 mm NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, cold drawn, pickled, annealed 76.2 x 3.3 mm NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, cold drawn, pickled, annealed 88.9 x 3.05 mm (3"nb sch10s) NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, cold drawn, pickled, annealed 88.9 x 5.49 mm (3"nb sch40s) NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 114.3 x 3.05 mm (4"nb sch10s) NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 114.3 x 6.02 mm (4"nb sch40s) NICKEL 600 (75 Ni/16 Cr) Pipe; extruded, pickled, annealed 141.3 x 6.55 mm (5"nb sch40s) NICKEL 600 (75 Ni/16 Cr) Pipe; extruded, pickled, annealed 153.0 x 6.5 mm NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, extruded, pickled, annealed 168.28 x 7.11 mm (6"nb sch40s)

Alloy 600 Pipes Stock List

Standard lengths of 2000 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).

5.00 mm x 0.50 mm 5.00 mm x 1.00 mm 6.00 mm x 0.50 mm 6.00 mm x 1.00 mm 8.00 mm x 1.00 mm 8.00 mm x 1.50 mm 10.00 mm x 1.00 mm 10.00 mm x 1.50 mm 10.00 mm x 2.00 mm 12.00 mm x 1.00 mm 12.00 mm x 1.50 mm 12.00 mm x 2.00 mm 13.72 mm x 1.65 mm 1/4" NB SCH 10 13.72 mm x 2.24 mm 1/4" NB SCH 40 14.00 mm x 2.00 mm 15.00 mm x 1.50 mm 17.10 mm x 1.65 mm 3/8" NB SCH 10 17.10 mm x 2.31 mm 3/8" NB SCH 40 18.00 mm x 2.00 mm 20.00 mm x 2.00 mm 21.34 mm x 2.11 mm 1/2" NB SCH 10 21.34 mm x 2.77 mm 1/2" NB SCH 40 21.34 mm x 3.73 mm 1/2" NB SCH 80 22.00 mm x 1.00 mm 22.00 mm x 2.00 mm 24.00 mm x 2.00 mm 24.00 mm x 4.00 mm 25.00 mm x 2.00 mm 25.40 mm x 1.65 mm 25.40 mm x 2.11 mm 25.40 mm x 2.77 mm 26.67 mm x 1.65 mm 3/4" NB SCH 5 26.67 mm x 2.11 mm 3/4" NB SCH 10 26.67 mm x 2.87 mm 3/4" NB SCH 40 26.67 mm x 3.91 mm 3/4" NB SCH 80 30.00 mm x 2.50 mm 33.40 mm x 1.65 mm 33.40 mm x 2.77 mm 1" NB SCH 10 33.40 mm x 3.38 mm 1" NB SCH 40 33.40 mm x 4.55 mm 1" NB SCH 80 36.00 mm x 3.00 mm 40.00 mm x 2.50 mm 42.16 mm x 2.77 mm 1 1/4" NB SCH 10 42.16 mm x 3.56 mm 1 1/4" NB SCH 40 48.26 mm x 1.65 mm 1 1/2" NB SCH 5 48.26 mm x 2.77 mm 1 1/2" NB SCH 10 48.26 mm x 3.68 mm 1 1/2" NB SCH 40 48.26 mm x 5.08 mm 1 1/2" NB SCH 80 50.00 mm x 2.50 mm 60.32 mm x 2.77 mm 2" NB SCH 10 60.32 mm x 3.91 mm 2" NB SCH 40 60.32 mm x 5.54 mm 2" NB SCH 80 66.00 mm x 4.00 mm 73.02 mm x 3.05 mm 2 1/2" NB SCH 10 73.02 mm x 5.16 mm 2 1/2" NB SCH 40 76.10 mm x 3.20 mm 88.90 mm x 3.05 mm 3" NB SCH 10 88.90 mm x 5.49 mm 3" NB SCH 40 88.90 mm x 7.62 mm 3" NB SCH 80 101.60 mm x 3.05 mm 114.30 mm x 3.05 mm 4" NB SCH 10 114.30 mm x 6.02 mm 4" NB SCH 40 114.30 mm x 8.56 mm 141.30 mm x 3.40 mm 168.30 mm x 3.40 mm 168.30 mm x 7.11 mm 6" NB SCH 40 219.10 mm x 3.76 mm 219.10 mm x 8.18 mm

Inconel 600 Pipe Stock

Inconel 600 Seamless Pipe
Inconel 600 Welded Pipe
Inconel 600 Exhaust Pipe
Inconel 600 Pipe material
Inconel 600 Weld Pipe
Inconel 600 Lined Pipe
Inconel 600 Square Pipe
Inconel 600 Clad Pipe
Inconel 600 Flex Pipe

Inconel 600 Pipe Pressure Rating

Inconel 600 Pipe pressure rating

American standard for Process piping (ASME B31.3 : 2012)

Selected wall tolerance: ±10%
OUTSIDE DIAMETER AND WALL THICKNESS (MM): 1.59 x 0.36

Grade

Maximum internal pressure, ksi

  100°F 200°F 300°F 400°F 500°F 600°F 700°F Comments N06600 :1 8.02 8.02 8.02 8.02 8.02 8.02 8.02 B167 OD>5" and hotworked N06600 :2 9.6 9.6 9.6 9.6 9.6 9.6 9.6 B167 OD<=5" and hotworked + OD>5" and coldworked N06600 :3 11.19 11.19 11.19 11.19 11.19 11.19 11.19 B167 OD<=5" and coldworked

Selected wall tolerance: ±10%
OUTSIDE DIAMETER AND WALL THICKNESS (MM): 6 x 1

Grade

Maximum internal pressure, ksi

  100°F 200°F 300°F 400°F 500°F 600°F 700°F Comments N06600 :1 392 392 392 392 392 392 392 B167 OD>5" and hotworked N06600 :2 470 470 470 470 470 470 470 B167 OD<=5" and hotworked + OD>5" and coldworked N06600 :3 547 547 547 547 547 547 547 B167 OD<=5" and coldworked

Selected wall tolerance: ±10%
OUTSIDE DIAMETER AND WALL THICKNESS (MM): 8 x 1

Grade

Maximum internal pressure, ksi

  100°F 200°F 300°F 400°F 500°F 600°F 700°F Comments N06600 :1 284 284 284 284 284 284 284 B167 OD>5" and hotworked N06600 :2 340 340 340 340 340 340 340 B167 OD<=5" and hotworked + OD>5" and coldworked N06600 :3 397 397 397 397 397 397 397 B167 OD<=5" and coldworked

Disclaimer: The pressures suggested in this table are given only as guidance. Dimensioning of piping systems is also depending on other factors like external forces, thermal stresses, dead weight etc. Furthermore the design must be made according to regulations from local authorities and approved accordingly.

For Pipes in pressure vessels and boilers it is important to consider standards like:

  • American standard ASME Boiler and Pressure Vessel Code Section VIII Division 1 and 2.
  • Pressure Equipment Directive 97/23/PG (PED)
  • Machine Directive 2006/42/EG for European applications

Inconel 600 Pipe Welding Tips

Inconel 600 Pipe is a nickel-chromium alloys which is used in different welding processes. Inconel 600 Pipe is most commonly used in techniques where high heat tolerance is required. Welding Inconel can be rather difficult because the welds that are created have a tendency to crack. There are a few alloys of Inconel that were specifically designed for use in welding like TIG.

Inconel 600 Pipe composition & technical information

Inconel 600 Pipe Yield Strength

Inconel Alloy 600 Pipe Chemical Composition

Grade C Mn Si Fe S Cr Cu Ni Inconel 600 Pipe min. – – – 6.0 – 14.0 – 72.0 max. 0.15 1.0 0.5 10.0 0.015 17.0 0.5 –

Inconel 600 Pipe Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness Rockwell B (HR B) max Brinell (HB) max Inconel 600 Pipe Psi – 95,000 , MPa -655 Psi – 45,000 , MPa – 310 40 – –

Equivalent Grades for Inconel 600 Seamless and Welded Pipes

Grade UNS No Old British Euronorm GOST Japanese JIS BS En No AFNOR Inconel 600 Pipe N06600 NA 13 NiCr15Fe 2.4816 NC15FE11M МНЖМц 28-2,5-1,5 NCF 600

Inconel Alloy 600 Pipe Weldability of materials

Table 1: Filler selection for nickel alloys

Parent Alloy Filler designations Comments Alloy BS EN ISO 18274 AWS A5.14 Trade names Pure nickel         Nickel 200 Ni 2061 ERNi-1 Nickel 61 Matching filler metal normally contains 3%Ti Nickel Copper         Alloy 400 Ni 4060 ERNiCu-7 Monel 60 Matching filler metal contains additions of Mn, Ti and Al Nickel Chromium         Brightray S Ni 6076 - NC 80/20 Ni-Cr and Ni-Cr-Fe filler metals may be used Nimonic 75 Ni 6076 - NC 80/20 Nickel-Chromium-Iron         Alloy 800 Ni 6625 ERNiCrMo-3 Inconel 625
Thermanit 21/33 Usually welded with Ni-Cr-X alloys, but more nearly matching consumables are available which contain higher C and also Nb Alloy 600 Ni 6082 ERNiCr-3 Inconel 82 Matching filler metal contains Nb addition Alloy 718 Ni 7718 ERNiFeCr-2 Inconel 718 Matching filler metal is normally used but Alloy 625 is an alternative consumable , if postweld heat treatment is not applied Nickel-Chromium-Molybdenum         Alloy 625 Ni 6625 ERNiCrMo-3 Inconel 625 Filler metal is also used widely for cladding and dissimilar welds Hastelloy C-22 Ni 6022 ERNiCrMo-10 Hastelloy C-22   Nickel-Molybdenum         Hastelloy B-2 Ni 1066 ERNiMo-7 Hastelloy B-2 Corrosion resistant alloys require matching fillers

Inconel 600 Pipe Price

PRODUCT NAME PACK QTY PRICE Alloy 600 1/4"(13.72mm) NB x Sch 10/10s(1.65mm) wall x500mm 1

£80.00

Alloy 600 1/4"(13.72mm) NB x Sch 10/10s(1.65mm) wall x500mm 5

£230.00

The company is the world’s best monel tubing supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Alloy 600 1/4"(13.72mm) NB x Sch 10/10s(1.65mm) wall x1000mm 1

£101.00

 

Inconel 600 Pipe Fittings

Inconel 600 Pipe Fittings Manufacturer & supplier in India

Inconel 600 Pipe Fittings suppliers, Inconel 600 butt weld fittings, Inconel 600 forged fittings manufacturer

Looking for Inconel 600 price in India? Get free quote from Dynamic Forge & Fittings-India’s leading Pipe Fittings manufacturer & buy Inconel 600 piping products at best price

Dynamic Forge & Fittings was the first company in India who was awarded the order to supply Inconel 600 Pipe Fittings & Flanges by Indian Oil Corporation for their refinery at Mundra. In 2008 Jordan Petroleum Refinery Company Limited selected Dynamic Forge & Fittings to supply stainless steel pipe fittings & alloy steel pipe fittings to Amman, Jordan out of  6 top manufacturers of pipe fittings in INDIA based on pressure rating of our pipe fittings.

Dynamic Forge & Fittings (I) Pvt. Ltd. is an approved manufacturer of Inconel 600 Butt weld Fittings & Inconel 600 Forged Fittings to requirements of BVIS, IBR, BARC, DNV, BHEL & we are ISO 9001:2008, 14001:2004, OHSAS 18001:2007 certified company.

All our Inconel 600 Pipe Fittings conform to relevant material and dimensional specifications and can be supplied complete with material certificates to EN 10204 3.1.

Inconel 600 Pipe Fittings Size & Specification

Specification : ASTM B366, ASTM SB 366, ASTM B564, ASME SB564 Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43. Size : ½”NB to 24″NB in Sch 10s, 40s, 80s, 160s, XXS. Thickness : Sch Sch 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160 Sch XXS Types : Seamless / ERW / Welded / Fabricated Grades : Inconel 600 – UNS N06600, Inconel 601 – UNS N06601
Inconel 625 – UNS N06625
Incoloy 800 – UNS N08800, Incoloy 800H / HT – UNS N08810, Incoloy 825 – UNS N08825

Surplus stock at Dynamic Forge & Fittings

Inconel 600 Pipe Fittings

Inconel 600 Elbow

Inconel 600 Tee

Inconel 600 Reducers

Types of Inconel 600 Pipe Fittings

1) Inconel 600 Butt weld Fittings

Below are mostly used butt weld fittings, click on below links to get dimensions & diagrams of Inconel 600 buttweld fittings:

1) Inconel 600 Forged Fittings

Below are mostly used forged fittings, click on below links to get dimensions & diagrams of Inconel 600 socketweld fittings & Inconel 600 threaded fittings:

Inconel 600 Pipe Fittings Project Reference List

Dynamic Forge & Fittings supplied Inconel 600 Pipe Fittings in more then 37 countries in last 10 years

PROJECT NAME / CUSTOMER DYNAMIC FORGE & FITTINGS SUPPLIED GRADES LOCATION YEAR INDORAMA Inconel 600 BUTT WELD FITTINGS AND BRANCH OUTLETS BW – SW – THRD A105 – A350 LF2 – A106B- A333 GR6 – A234 WPB – A420 WPL6 – A182 F304L THE NETHERLANDS 2015 GAS AND CONDENSATE EXPORT SYSTEM Inconel 600 BUTT WELD FITTINGS AND BRANCH OUTLETS BW – SW A182 F316L – A182 F44
A182 F44 , A312 S31254, A182 F316L,
A105.N, A105 HDG, A350 LF2, A106
Gr.B, A106 Gr.B HDG , A333 Gr.6, A234 WPB KUWAIT 2015 GAS DEVELOPMENT PROJECT Inconel 600 BUTT WELD FITTINGS, BRANCH OUTLETS INCOLOY 825 INDONESIA 2015 QUALITY STAMP TRADING -SAUDI ARAMCO Inconel 600 BUTT WELD FITTINGS , BRANCH OUTLETS SW A105, A105 GALV, A350 LF2, A182 F304L,
A182F316L, A403 WP316L, A182F321,
A182F44, A182F5, CU90/10 UNS C70610 SAUDI ARABIA 2014-2015 REFINERY OFF GAS PROJECT Inconel 600 BUTT WELD FITTINGS, BRANCH OUTLETS BW-THRD, NIP OUTLETS A105, A105 HDG A350 LF2, A182 F304/
304L, A182 F316/316L, A182 F11,
A105N, A106B, A234 WPB, A333 BELGIUM 2014-2015 MA’ADEN WA’AD AL SHAMAL PHOSPHATE BUTT WELD FITTINGS AND BRANCH OUTLETS SW-BW A350LF2, F304L, F316L, F904L,
A182F60, ALLOY20
A105N, A106B, A234 WPB, SAUDI ARABIA 2014-2015 NORTH WEST REDWATER Inconel 600 BUTT WELD FITTINGS SW & NPT A350LF2, A420WPL6,
A182F304L-F316L,WP304L, HAST,C276 CANADA 2014-2015 CANADA NWR PROJECT Inconel 600 BUTT WELD FITTINGS , BRANCH OUTLETS SW & NPT F304L/316L/317L/347H/321H
F11/F22/ UNS08825 CANADA 2014-2015 DENIZ 2 PROJECT BUTT WELD FITTINGS SW & NPT A 105, A105 GALVA, A350LF2, A333 Gr6,
A234WPB-A420WPL6, F304L, WP304L AZERBAIJAN 2014 ADMA OPCO ABU DHABI BUTT WELD FITTINGS, BRANCH OUTLETS BW-THRD, LATERAL, OUTLETS A694 F52, A182F321, A182F316, A105.N,
A312TP316L, A312 TP321, A182 F53
SUPER DUPLEX UAE 2014 SAUDI ARAMCO HOLLAND Inconel 600 BUTT WELD FITTINGS CuNi 9010 SAUDI ARABIA 2014 MISSAN OIL Comp.PETROCHINA IRAQ API COUPLINGS L80 IRAQ 2014 SAUDI ARAMCO Inconel 600 BUTT WELD FITTINGS, BRANCH OUTLETS BW-SW-THRD MONEL 400, A182 F5, A182F316L,
A182F304L, A105 SAUDI ARABIA 2014 OIL AND GAS INC Inconel 600 BUTT WELD FITTINGS AND BRANCH OUTLETS BW UNS NO 6625 BRAZIL 2014 SHIDDIRGANG PROJECT Inconel 600 BUTT WELD FITTINGS, BRANCH OUTLETS BW-SW-THRD   BANGLADESH 2014 SAUDI ARABIAN MINING COMPANY Inconel 600 BUTT WELD FITTINGS AND BRANCH OUTLETS SW – BW A105, A105 GALV, A350LF2A182F304L,
A182F316L SAUDI ARABIA 2014 GAS TURBINE POWER PLANT PROJECT Inconel 600 BUTT WELD FITTINGS AND BRANCH OUTLETS SW A105, A182F316L IRAQ 2014 GRUPO CUNADO FORGED STEEL FITTINGS A105,A182F304L, A182F316L,F321, TURKEY 2013-2014 ALSTOM FORGED STEEL FITTINGS AND BRANCH OUTLETS A105, A182F304L, A182F316L

MOROCCO, SOUTH AFRICA

2010

Inconel 600 Pipe Fittings packaging & express delivery worldwide

Dynamic Forge & Fittings (I) Pvt. Ltd. emphasis on the packaging to ensure that there is no damage during transit the Inconel 600 Pipe Fittings are packed in wooden corrugated boxes foiled in bubble wraps & are marked with Grade, Lot No, Size, Degree and Dynamic Forge & Fittings Brand Mark. You can also contact us for customized marking.

Express Delivery: We understand the urgency of product requirement for Oil & Gas Industry & industrial breakdowns at various situations attenuating the project performance

Want more information on s32750 super duplex? Feel free to contact us.

A leading Inconel 600 grade buttweld pipe fittings, Inconel 600 forged fittings, Inconel 600 pipe fittings, SCH 10S, SCH 40S, SCH 80S, SCH 160 or XXS butt weld fittings, Inconel 600 reducers/tees/elbows/caps/4 way pipe connector and stub ends. Inconel 600 Pipe Fittings, welded pipe fittings manufacturer, exporter, stockholder & wholesaler in India