Photovoltaic (PV) technology is an ideal solution for the electrical supply issues that trouble the current climate-change, carbon-intensive world of power generation. PV systems can generate electricity at remote utility-operated "solar farms" or be placed directly on buildings themselves. Their fuel source is simple sunlight, and they produce electricity without the negative environmental consequences associated with other power generation methods. They are silent and reliable. The size of PV installations can range from extremely small to enormously large. They can be scaled down for small loads like specific site luminaires, remote communication devices, and individual water pumps; or they can occupy hundreds of acres and generate enough electricity to power thousands of buildings.
For more information, please visit Jiasheng.
For building installations, PV systems fall into two categories, building applied photovoltaics (BAPV) and building integrated photovoltaics (BIPV). BAPV is the more common type of installation, with the solar collectors located completely outside of the building envelope. Roof-mounted, ballasted solar arrays placed on top of the roofing material are BAPV assemblies. A BIPV installation is when the photovoltaic collectors are an integral part of the building envelope. They can either replace exterior shell components or be integrated into them. Examples of BIPV components and materials currently on the market include: PV glass windows, PV glass skylights, awnings, balustrades, canopies, shingles, exterior wall panels, and even PV walkable surfaces.1 Not only do BIPV systems generate electricity, but they can add visual interest and aesthetic design elements to the building.
Building Integrated Photovoltaics (BIPV) are when the photovoltaic collector elements are located directly within a building's envelope (or canopy structure). Photo Credit: U.S. Department of Energy / EERE
Building owners and utilities all benefit with the implementation of PV systems. The contribution of PV generated electricity can have major impacts on the peak demand loads that utilities have to provide power for. Late afternoon sunshine and heat accumulation in buildings lead to greater requirements placed on air conditioning systems to keep occupants cool. A building-located photovoltaic system takes advantage of these same sunshine conditions to provide electricity for the building while simultaneously lessening the pressure on the utility grid to increase electricity production. The use of photovoltaics lowers the overall U.S. carbon footprint for electricity generation.
Solar energy installations have an impact on the fuel sources used by utilities to generate electricity for the grid. As PV generated power increases in the energy infrastructure, the use of higher carbon-footprint generated electricity decreases. Image Credit: Ronald Fergle based on a graphic by Lena Hansen and Virginia Lacy of the Rocky Mountain Institute
A building's self-consumption of the electricity generated by its PV system improves the cost-effectiveness of the installation. Buying electricity from the grid costs more than revenue achieved by selling electricity to the grid. Utilizing batteries to store PV electricity for later use can dramatically reduce the need for grid-supplied electricity. The potential for including battery storage in a PV system design should take into consideration the building loads, the time of day, the available PV generated power, and the costs for various levels of battery storage. Properly sized systems can be cost-effective for consumers.
The self-consumption of PV generated electricity coupled with battery storage can significantly reduce the need for grid-supplied electricity. Image Credit: Ronald Fergle based on a graphic by Ralf Haselhuhn.
Depending on the fuel source, generation of electricity at a utility power plant can be inefficient and carbon-intensive, while simultaneously causing the release of Greenhouse Gasses (GHGs) and harmful fine Particulate Matter (PM2.5). In addition, of the electricity that enters the grid from a power plant, the U.S. Energy Information Agency (EIA) estimates that 5% is lost due to transmission and distribution (T&D) inefficiencies.2 Distributed Energy Resources (DERs) such as BIPV systems, do not have these negative environmental impacts. Solar energy is a clean, renewable energy source, and the electricity generated is already located at the point of use. For more information regarding Distributed Energy Resources, refer to the energy.gov website.
The categories of common photovoltaic technologies used in BIPV applications include:
Crystalline silicon (c-Si): Solar cells made from solid crystalline silicon wafers (mono-crystalline or poly-crystalline/multi-crystalline) can deliver approximately 20 watts per ft2 of PV array. Versions of these cells may incorporate additional layers of solar absorption materials in order to increase electrical production. Individual cells are wired together and assembled into modules at factories before being shipped to project sites.
Thin-film: These products typically incorporate very thin layers of photovoltaic compounds that have been deposited on substrate materials using plasma enhanced, chemical vapor deposition (PECVD) processes. Commercial thin-film materials deliver about half the watts per ft2 of PV array area compared to c-Si modules. Thin-film products can be rectilinear modules, rolled-out surfaces, or take the shape of an underlying architectural element. This category includes: copper indium gallium (di)selenide (CIGS), cadmium telluride (CdTe) and amorphous silicon (a-Si) cells.
Emerging-PV: These technologies include dye-sensitized solar cells (DSSC), Perovskite cells, organic cells, and quantum dot cells, among others. Efficiencies in laboratory environments range from 13% to 26%. Cells in this category can exhibit properties of transparency, flexibility, or color; and they require lower energy expenditures to create.
The DSSC cells represent a new type of solar cell that require less energy-intensive materials to manufacture, and because of their simplicity can be less costly to produce. These cells are comprised of three basic parts: the front-side glass transparent conducting oxide (TCO) electrode, an interior electrolyte solution, and a back-side counter electrode. The inside surface of the front glass is first sintered with a transparent anode, e.g., fluoride-doped tin dioxide (SnO2:F) to make the TCO. Then it is covered with titanium dioxide (TiO2) nanoparticles coated with photo-sensitive dyes. When the dyes are exposed to sunlight their electrons are energized and elevated into the conduction band of the TiO2. From there they migrate to the TCO anode material. After flowing through an external circuit as electricity, the electrons re-enter the DSSC cells through a back-side counter electrode surface. The liquid electrolyte then transports the electrons back to the dye materials to re-oxidize them.
A schematic showing the movement of electrons in the DSSC photovoltaic process. Image Credit: Ronald Fergle
A PV installation includes:
PV Modules: These "solar collectors" can be crystalline, thin-film, or one of the emerging PV technologies. They can be transparent, semi-transparent, or opaque.
PV Modules: These components are where the conversion of sunlight into electricity actually occurs. Energetic photons in sunlight excite electrons in the semi-conductor materials which elevate them to a higher energy conduction band. The electrons then become free to move as electricity within an external circuit. The electricity coming from PV modules is always Direct Current (DC).
Module Mounting Systems: BIPV mounting systems use clips, bolts, or adhesives to fix the modules directly to the envelope structure. Photovoltaic glass units for façade or roof applications are installed similarly to windows or skylights, but with DC cabling attached. For BAPV installations these systems usually consist of metal frameworks called racking. They can be constructed to create fixed, saw-tooth arrangements or flat planes that are located close to the roofing surface. Typically weights or heavy blocks are used to secure the racking in place.
Wiring, Combiner Boxes, DC Disconnects, and AC Disconnects: These are the components that facilitate and address the flow of electricity in the installation. Individual wiring from groups of modules can be combined into single cables in combiner boxes for circuit simplicity and to reduce the overall amount of wiring material. Combiner boxes also provide over-current protection. DC Disconnects and AC Disconnects are switches located at strategic points in the installation in order to disconnect or curtail the flow of electricity.
Inverters: These units convert the DC electricity coming from the PV modules into AC electricity. String invertors handle the output from multiple modules, and micro-inverters are dedicated to a single module.
Electrical Distribution Panels: This is the location where PV installations interconnect with a building's electrical infrastructure. Power coming from the PV system is wired into the distribution panelboard as an individual circuit. The circuit breaker on this circuit is referred to as the Over Current Protection Device (OCPD) and subject to specific sizing requirements.
Batteries: These devices store power for use at a later time. The energy flow into and out of the battery storage system is determined based on user-specified parameters or building energy management system (BMS) directives. Batteries are commonly used to store power generated from the PV array during sunny periods, and then provide that power later on to help meet the facility's energy requirements.
For more detailed information on PV module technologies and BOS Components, refer to the related discussion on the WBDG PV page.
A simplified guide for how PV modules can be connected to power optimizers, string inverters, or micro-inverters based on system design objectives. (System schematics, including combiner boxes and disconnect switches, vary based on project parameters and equipment used.) Image Credit: Ronald Fergle
Building Integrated Photovoltaics is the implementation of photovoltaics as part of the building envelope. The solar collectors serve the dual function of protecting the structure from external environmental conditions, as well as being a source for electrical power. While the BIPV system itself has an initial financial cost, because it potentially replaces other building materials the overall costs of the envelope may not increase significantly. BIPV systems can also reduce HVAC electrical requirements and cooling costs when the modules are used to shade the building. When all of the advantages are taken into consideration, BIPV installations can be viewed as financial investments. They have an up-front cost, but in turn they can significantly reduce or eliminate a building's yearly energy costs, pay for themselves, and provide building owners with continuing economic savings. A recent study has documented how BIPV installations have a positive return-on-investment (ROI), and even north-facing facades can be economically feasible.3
The process of designing a BIPV system is not unlike that for other building systems. Decisions should take into consideration life-cycle cost analyses in addition to up-front costs, installation procedures, performance expectations, and O&M requirements. However, with BIPV installations the aesthetics are also important and should be taken into account.
Steps in designing a BIPV system overlap, in that the consideration of one topic may impact the resolution for another. A successful solution addresses all concerns simultaneously. The general list of topics includes:
Location of Installation: Any exterior building surface is a potential location for a BIPV installation. Roof elements include: photovoltaic shingles, rolled thin-film surfaces, and PV glass skylights that have PV cells or transparent PV surfaces incorporated into them. Wall possibilities include: siding with integrated PV surfaces, PV glass windows that contain PV cells or PV coatings, and shading devices that are also PV collectors. Railings, carports, and covered entryways are additional locations. As part of the PV component selection process it is important to consider how the collector surfaces will be attached to the sub-structure. Manufacturers of PV components provide detailed information regarding mounting requirements.
Building Electrical Load Analysis: Consider the building's electrical usage patterns and adjust loads if possible to reduce peak levels. Depending on the building type (or functions occurring within the structure), shifting when power is required can reduce demand spikes and the peak loads they place on the PV system. Examples of flexible tasks include: meetings that require lighting and space conditioning, optional machinery processes, operation of dishwashers or laundry facilities, and heating of hot water for thermal storage. Electrical demands are typically greater in the afternoon because of HVAC cooling loads, so when non-time-sensitive tasks can be moved to the morning hours, the peak afternoon loads become less. Installing motion detectors on lighting systems and turning off office equipment when not in use are simple strategies to reduce power demands. It has also been shown that educating building occupants about the benefits of reducing plug-loads helps to achieve lower energy use.4 In addition, it may be worthwhile to incorporate battery storage to reduce the purchase of electricity during the more expensive power demand periods.
Provide Adequate Ventilation: PV performance efficiencies are reduced by elevated operating temperatures. This affects crystalline silicon PV cells more than amorphous silicon thin-films, but all PV cells are susceptible. To improve conversion efficiency, allow appropriate ventilation behind the modules in order to dissipate heat.
Consider Using PV Modules to Filter Direct Sunlight: When using semi-transparent thin-film modules or semi-transparent crystalline modules (where the PV cells are placed apart from each other between two layers of glass), it is possible to create unique daylighting features in facades, roofing, or skylight PV systems. These elements can help reduce unwanted cooling loads and the glare associated with large expanses of architectural glazing.
Incorporate PV Modules as Shading Elements: PV arrays can double as awnings over view-glass areas of buildings and can provide appropriate shading. When sunshades are considered as part of an integrated design approach, chiller capacity can often be smaller and perimeter cooling distribution reduced or even eliminated.
Address Site Planning Issues: Early in the design phase, ensure that the solar array will receive maximum exposure to the sun and will not be shaded by site obstructions such as nearby buildings or trees. It is important that the system be unshaded during the peak solar collection period consisting of three hours on either side of solar noon. The impact of shading on a PV array can be significant.
Consider Array Orientation: Array orientation and tilt impacts the annual energy output of a system. Arrays tilted towards the Sun generate 50%&#;70% more electricity than vertical façade installations, and southern facing arrays maximize power generation. However, advancements in PV technologies have increased the flexibility of array design; so it may be possible to tune the electrical output of a system to be closer to the time of day the power is required. Certain module types may be more effectively used facing east for the morning solar gain, or west for the late afternoon sunlight conditions (CdTe, CIGS, DSSC, and a-Si thin-films), and high-gain modules (typically c-Si) can be aligned slightly west of south so they produce more electricity during the afternoon peak building demand loads. As the costs for PV installations continue to decrease, the strategy to provide more continuous power generation becomes more affordable. Portions of arrays that are oriented to the east or west may not be as high in efficiency or produce the sheer volume of electricity that the southern facing portions do, but they can provide additional power closer to the time that some building loads require it.
Use Credentialed Professionals: Ensure that the designers, installers, and maintenance professionals involved with the project are properly trained, licensed, certified, and experienced in PV systems work. They should be knowledgeable of the latest advancements in commercially available technologies, products, and installation practices.
Solar insolation levels can vary based on building surface orientation. While surfaces tilted towards the Sun receive the most energy, secondary and tertiary surfaces can still contribute meaningful amounts of PV generated electricity. Image Credit: Ronald Fergle based on a graphic by Polysolar Ltd.
BIPV systems can be designed to blend in with traditional building materials and appearances, or they may be used to create a more innovative aesthetic. The examples below show how PV modules can become attractive elements of building exteriors. Photovoltaics may be integrated into numerous assemblies within building envelopes, including:
Facades: Solar cells can complement or replace traditional view windows or spandrel glass. While these installations are on vertical surfaces, which reduce the intensity of the solar insolation, the overall size of a facade can help compensate for the reduced power per unit area.
Awnings: Photovoltaics may be incorporated into awnings or slightly sloped, saw-tooth canopy designs. Semi-transparent modules provide filtered sunlight underneath while affording additional architectural benefits such as passive shading.
Roofing: The use of PV in roofing systems can provide a direct replacement for batten and seam metal roofing, traditional 3-tab asphalt shingles, and ceramic tiles. Note that these types of installations require adequate ventilation in order to keep the cell temperatures cooler.
The company is the world’s best bipv panels supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Skylights: Using PV for skylight systems can be both an economical use of PV and an interesting design feature. Just as with PV windows, the semi-transparency enables visual connections to the exterior environment while providing diffuse natural lighting.
An example of the aesthetic potential of BIPV is the SwissTech Convention Center (STCC) on the Ecole Polytechnique Federale de Lausanne (EPFL) Ecublens, Switzerland, campus. The southwest façade contains 280 m2 of 355 integrated Die-Sensitized Solar Cells (DSSC), also called Grätzel cells, arranged within 65 columns of various heights. The system provides 3 kWp of electricity. The transparent DSSC installation filters direct afternoon sunlight entering the convention center main lobby; while at the same time providing a visual connection to the exterior environment with views to the sky, neighboring buildings, trees, and passersby.
Exterior views of the SwissTech Convention Center southeast façade (left) and southwest façade (right). Photo Credit: Ronald Fergle
Interior views of the DSSC modules exhibit a canvas of translucent vertical ribbons of color with the blue sky in the background. As the sun progresses through the sky, the colorful shadows cast from the modules move across the lobby floor. Photo Credit: Ronald Fergle
The light-weight modules are mounted to metal bars on the exterior side of the window glazing. The electrical cabling runs within channels next to the windows. Photo Credit: Ronald Fergle
Examples of c-Si wafers being used in innovative ways include the Energiewürfel building in Konstanz, Germany, and the Ludesch Community Centre in Vorarlberg, Austria. The modules have dual-glass surfaces with individual, perforated c-Si wafers spaced evenly inside. The installations filter direct sunlight while simultaneously providing views beyond. The Energiewürfel large-format, south-facing window installation has a 22% transparency, and when combined with the PV roof installation generates 23.2 kWp of electricity. The 350 m2 Ludesch Community Centre canopy is comprised of 120 slightly-sloped modules oriented to the southwest, and generates 16,000 kWh/yr of electricity. The canopy emphasizes the exterior gathering area while protecting visitors from rain and snow.
Semi-transparent module installations in the Energiewürfel building in Konstanz, Germany, (left) and the Ludesch Community Centre "town square" plaza in Vorarlberg, Austria (right). Photo Credit: Sunways AG
The Beit Havered building near Aviv, Israel, has a photovoltaic façade composed of crystalline silicon glass with white digital printing on the surface. The printing provides a more traditional appearance while allowing the solar energy to pass through to the PV cells behind. The 608 m2 installation is estimated to generate 1,938,623 kWh of electricity over 35 years, with avoided CO2 emissions of 1,409 Tons of CO2. The system payback period is less than 4 years.
The Beit Havered building's façade of c-Si PV glass with white digital printing on the surface provides a more traditional commercial/office building aesthetic. Photo Credit: Onyx Solar
The Paul Horn Arena in Tübingen, Germany, is comprised of PV modules designed to be both attractive and efficient power generators. The aesthetics take advantage of the emerald-green "fractured" multi-crystalline silicon cell appearance mounted within oversized white rectangular frames. The unobstructed, 530 m2 installation receives continuous solar insolation throughout the day. The system generates 43.7 kWp of electricity.
The south façade of the Paul Horn Arena in Tübingen, Germany. Photo Credit: Sunways AG
The Life Sciences Building (LSB) at the University of Washington has a 650 m2 20% transparent amorphous silicon (a-Si) vertical fin BIPV installation on the southwest curtain wall. The photovoltaic fins generate 3.15 W/ft2, and over their 35 year lifespan are estimated to provide 496,885 kWh of electricity with a CO2 avoidance of 333 Tons of CO2.
The southwest façade of the Life Sciences Building (left) and a close-up of the semi-transparent fins (right). Photo Credit: Onyx Solar
The Frank Gehry designed Novartis Campus building in Basel, Switzerland, exhibits the freeform potential of BIPV. The envelope contains a combination of dual-glass PV skylights and PV window modules with imbedded, perforated PV cells. The 1,300 m2 PV installation provides 92 kWp of electricity.
The Novartis Campus building southern façade (left) and outward view from the interior (right) show that photovoltaic systems do not need to dominate a building's aesthetic to be effective. Photo Credit: Sunways AG
1 Onyx Solar, Products and Services.
2 U.S. Energy Information Administration, Frequently Asked Questions (FAQS).
3 "Economic analysis of BIPV systems as a building envelope material for building skins in Europe", by Hassan Gholami and Harald Nils Røstvik; Department of Safety, Economics and Planning, University of Stavanger, Kjell Arholmsgate 41, , Stavanger, Norway.
4 "Sustainability in Practice, Building and Running 343 Second Street, The Packard Foundation Headquarters", by Robert H. Knapp, Physics and Sustainable Design, Evergreen State College.
The use of solar energy is becoming increasingly popular as a renewable energy source. As such, two of the most common types of solar technology are Building-Integrated Photovoltaics (BIPV) and Building-Applied Photovoltaics (BAPV). While both technologies are used to generate electricity from the sun, they differ in terms of their installation, cost, and efficiency. This article will explore the benefits of BIPV and BAPV in order to help readers make an informed decision when selecting a solar technology.
BIPV is a type of solar technology that is integrated into the building&#;s structure. This means that the solar cells are installed directly onto the roof or walls of the building, making them an integral part of the building&#;s design. BIPV is often used in commercial and residential buildings, as it is aesthetically pleasing and can be used to generate electricity without taking up additional space. Additionally, BIPV is more efficient than BAPV, as it is able to capture more sunlight due to its direct integration into the building&#;s structure.
BAPV, on the other hand, is a type of solar technology that is applied to the building&#;s structure. This means that the solar cells are installed onto a separate structure, such as a frame or rack, which is then attached to the building. BAPV is often used in large-scale solar projects, as it is more cost-effective than BIPV and can be installed quickly. Additionally, BAPV is more flexible than BIPV, as it can be moved or adjusted to capture more sunlight.
When selecting a solar technology, it is important to consider the benefits of both BIPV and BAPV. BIPV is more efficient and aesthetically pleasing, while BAPV is more cost-effective and flexible. Ultimately, the decision should be based on the specific needs of the project.
When it comes to powering your home with renewable energy, there are two main options: building-integrated photovoltaics (BIPV) and building-applied photovoltaics (BAPV). Both of these systems have their advantages and disadvantages, so it&#;s important to understand the differences between them before making a decision.
BIPV systems are integrated into the building&#;s structure, such as the roof or walls. This means that they are less visible and can be designed to blend in with the building&#;s architecture. BIPV systems are also more efficient than BAPV systems, as they are able to capture more of the sun&#;s energy. However, they are more expensive to install and require more maintenance.
BAPV systems, on the other hand, are applied to the building&#;s exterior. This makes them more visible, but also more affordable to install. BAPV systems are also easier to maintain, as they are not integrated into the building&#;s structure. However, they are less efficient than BIPV systems, as they are not able to capture as much of the sun&#;s energy.
When deciding between BIPV and BAPV systems, it&#;s important to consider your budget, the aesthetics of your home, and the amount of maintenance you are willing to do. BIPV systems are more expensive and require more maintenance, but they are more efficient and can be designed to blend in with the building&#;s architecture. BAPV systems are more affordable and easier to maintain, but they are less efficient and more visible.
Ultimately, the best choice for your home will depend on your individual needs and preferences. If you have the budget and are willing to do the extra maintenance, a BIPV system may be the best choice. If you are looking for a more affordable and easier to maintain option, a BAPV system may be the better option.
The future of solar energy is bright, and the potential of both Building-Integrated Photovoltaics (BIPV) and Building-Applied Photovoltaics (BAPV) for residential applications is immense. Both technologies offer homeowners the opportunity to generate their own electricity, reduce their energy bills, and contribute to a cleaner, more sustainable environment.
BIPV is a type of solar panel that is integrated into the building&#;s structure, such as the roof or walls. This type of solar panel is aesthetically pleasing and can be used to replace traditional building materials, such as shingles or siding. BIPV panels are also more efficient than traditional solar panels, as they are able to capture more sunlight due to their integrated design.
BAPV, on the other hand, is a type of solar panel that is applied to the building&#;s structure, such as the roof or walls. This type of solar panel is less aesthetically pleasing than BIPV, but it is more cost-effective and easier to install. BAPV panels are also more efficient than traditional solar panels, as they are able to capture more sunlight due to their applied design.
Both BIPV and BAPV offer homeowners the opportunity to generate their own electricity, reduce their energy bills, and contribute to a cleaner, more sustainable environment. However, there are some key differences between the two technologies that should be considered when deciding which type of solar panel is best for a particular application.
BIPV is more aesthetically pleasing and can be used to replace traditional building materials, such as shingles or siding. However, BIPV is more expensive and requires more complex installation than BAPV. Additionally, BIPV panels are less efficient than BAPV panels, as they are not able to capture as much sunlight due to their integrated design.
BAPV is less aesthetically pleasing than BIPV, but it is more cost-effective and easier to install. Additionally, BAPV panels are more efficient than BIPV panels, as they are able to capture more sunlight due to their applied design.
Ultimately, the decision of which type of solar panel is best for a particular application will depend on the homeowner&#;s budget, aesthetic preferences, and energy needs. Both BIPV and BAPV offer homeowners the opportunity to generate their own electricity, reduce their energy bills, and contribute to a cleaner, more sustainable environment. As the cost of solar technology continues to decrease and the efficiency of solar panels continues to increase, the potential of both BIPV and BAPV for residential applications is immense.
For more solar roof tiles manufacturersinformation, please contact us. We will provide professional answers.