We all know how essential it is to drink pure and safe water. Unfortunately, there are many areas in Kenya where good quality water is not accessible without any water treatment system.
Today, a number of companies are offering multiple choices for water purifiers in kenya including UV, UF, RO as well as gravity based filters.
Do you know everything about buying water purifier systems? No? Don’t worry – here are few questions that you should ask your supplier before buying a water purifier:
Well. this only depends on the disinfection of the water supply at your home. It can only be checked out by water test. You can bring the sample of drinking water supplied at your home to the nearby lab.
This test will tell you what type of impurities are found in your water and what treatment is required for it. Thus, figuring out the contamination in your water can better help you decide the type of purifier you need for your home.
Once you test your water against impurities, you can better decide which purification system is best for you. For example, if you have a high percentage of metals, an RO water purifier is best for you.
What features should we look into while buying a water purifier?
Basically you should consider the below features:
The first step towards buying a water purifier is testing the quality of water. Make sure to visit only state-certified water quality testing labs. Water analysis test report tells the contaminants found in the water which includes overall analysis:
Chlorine in itself is considered as a disinfectant and used to purify the water. There should be a certain amount of chlorine present in water which is good for health.
A higher density may create some undesirable taste as well as the odor in water. Additionally, it can also mix with other chemicals present in water and produces some harmful by-products due to which water becomes unfit for drinking.
We recommend you to check the quantity of chlorine in your home water supply. If the limit exceeds, use carbon-based purification system to purify your water.
Activated Carbon filters are used to extract free chlorine from the water. It is also used to eliminate organic compounds such as humic and fulvic acids making the water fit for drinking.
Like Ro or UV based water purification systems, these systems can’t remove impurities like metals or all types of microbes from your water.
But definitely, if the water supply in your home is contaminated with a higher concentration of chlorine or suspended particles, then Activated Carbon treatment should be given to the water.
Basically, there are two types of purifiers available in Kenyan market:
Most of the purifiers are electric-based systems which include reverse osmosis (RO) and/or ultraviolet (UV) system. They require for purification of water. Electric purifiers work mostly on dissolved solids, viruses and harmful bacterias.
The non-electric systems are with basic sediment filters and sometimes with ultra-fine filter (UF) membrane.
Filters like UF and Activated Carbon come under this category. These systems eliminate dissolved chemicals, germs, viruses, suspended matter, and sand.
If your water has a large number of impurities (minerals, metals or other such pollutants) then you should choose electric purifiers.
However, if you live in an urban area where water quality is not so bad, you can opt for non-electric filters as well.
Most of the urban cities are supplied with municipal water. We all know that municipal water is infected with harmful impurities.
Although chlorine is used to kill microorganisms, it itself reacts with other impurities and produces very harmful THMs (trihalomethanes), which causes cancer. So, it is very important to treat the municipal water with the right water treatment system.
Here are some suggested water purifiers to treat municipal water impurities:
1. Gravity-based filter.
2. UV Water Purifier
3. RO Water Purifier
4. RO + UV/UF purifiers.
5. RO-UV Water Purifier
You cannot drink municipal water directly coming out of the tap because it contains many impurities that are very dangerous for your health. Therefore, we highly recommend you to use a suitable water purification system in your home.
To buy the right water purification system for your family make sure you get your municipal water tested.
Buying a water purifier is not enough at all. You need to maintain the purifier so that impurities don’t start polluting your water. Almost every company gives a warranty of at least one year to its customers for any malfunctioning defects.
This may arise during warranty period as well. So, you can take service from your water purifier company. But before purchasing, make sure to locate the nearest service center of the company so that you can easily avail the maintenance service.
For this, you must change the cartridges of carbon-based filters and gravity based filters within every 6-8 months.
In case, you use smart RO water filters, make sure to change their membrane after every 2 years. Additionally, you must consult a professional for annual maintenance to replace the filter annually. Don’t try to replace the filter on your own.
While buying a water purifier, always prefer the company that ensures installation services as well. A certified and experienced company guarantees correct installment of purifier at a right place in your home. Never invite a general plumber for this purpose.
While buying a water purifier, consult the supplier how much it will cost further to maintain the system. Additionally, servicing will also be required in order to clean the purifier, dispose of the waste etc.
After a certain period, you may also need to change filter cartridges or membranes.
Make sure to ask the additional expenses along with the buying cost of purifier so that you can manage the out-of-pocket expenses for the upcoming services.
There are certain water purifiers introduced by companies that have a shut-off valve or a warning light which indicates a malfunction or problem with the system.
If you are unsure when to service your purifier, investing in such purifiers is the only way to ensure that you and your family are drinking pure and healthy water.
The water treatment industry is in the forefront of treating drinking water that is both a health hazard and a nuisance to the household. Home water treatment service and supply companies and products promise to deliver drinking water that is safe and contaminant free. Purchasers need to sift through advertising claims and technical data to select the appropriate treatment method.
The first step in choosing a water treatment device is to have your water tested for contaminants and characteristics you suspect are causing a problem. Most people are alerted to potential problems due to objectionable taste, odor, color, or presence of sediments and staining. Rely on independent water tests conducted by a state certified lab to identify and evaluate specific contaminants.
If the water test indicates that you have a problem, installation of a treatment system may be necessary to remedy it. Be aware that water treatment equipment has tradeoffs:
Do your research and be a good consumer when shopping for water treatment equipment. The following are questions you can ask a water treatment professional or the water well contractor who installed the well to determine the type of system needed. Background information follows many of the questions. The extent to which the manufacturer or distributor is willing to provide answers can assist the consumer in making an informed choice.
Many water treatment companies provide free in-home water testing as part of their services. Not all contaminants can be evaluated this way. For example, many man-made chemicals, which have been associated with serious health problems, must be analyzed in a laboratory with sophisticated equipment. The consumer must be wary of companies that claim their home analyses determine more than basic water quality constituents such as hardness, pH, iron, and sulfur. Ideally, you should verify in-home tests with a water test conducted by a state certified laboratory.
Once you’ve accurately determined what contaminants and characteristics your drinking water has, the level detected will dictate the type of treatment system, if any, is most effective. Factors to consider include whether the water presents a health hazard and how the levels detected compare to Federal and/or State Drinking Water Quality Standards. Refer to the fact sheets about specific contaminants or characteristics that may be present in your drinking water. Additional information can be found on Internet sites such as the Environmental Protection Agency’s Office of Groundwater and Drinking Water
Make sure the company is reputable and established. Ask the company for referrals and contact the referrals to find out customer satisfaction.
NSF, International is a non-profit organization whose function is to set performance standards for water treatment equipment and evaluate test results of treatment devices to determine if claims are realistic. Products that have been tested and certified by NSF and meet their minimum requirements are entitled to display the NSF listing mark on the products or in advertising literature. Manufacturers and models that meet the applicable standard are included in a listing published twice a year. NSF has developed standards for the following types of treatment units.
ANSI/NSF 42: Drinking Water Treatment Units - Aesthetic Effects ANSI/NSF 44: Cation Exchange Water Softeners ANSI/NSF 53: Drinking Water Treatment Units - Health Effects ANSI/NSF 55: Ultraviolet Microbiological Water Treatment Systems ANSI/NSF 58: Reverse Osmosis Drinking Water Treatment Systems ANSI/NSF 62: Drinking Water Distillation SystemsAsk the sales representative which standards the product meets. Also, ask for test results showing removal of the specific contaminant(s) you need or want to remove. Tests by third party organizations (those neutral to and trusted by all interests served) should provide extra confidence.
Consider a second opinion on recommended water treatment equipment. Check with at least one additional dealer to see what treatment procedure and equipment is recommended, and ask questions. Compare at least two brands, and consult other references.
The Water Quality Association (WQA) is an organization of manufacturers, distributors, and dealers that sets minimum acceptable levels of knowledge for water treatment businesses, sales and equipment installers. Ask if the dealer is a member of WQA and if any employees are WQA-certified water specialists, sale representatives, or installers.
WQA is a voluntary organization, so nonmembers are not implied to be less competent. However, persons who have attended training sessions and taken tests to demonstrate their knowledge should know their business. The Association’s web page is www.wqa.org.
Depending on the type of contaminant and its concentration, you may need to treat all the water entering the house or only the water used for drinking and cooking. If the contaminant is only a problem when you drink it, such as lead, you may only need point-of-use (POU) treatment. POU treatment devices are typically installed at the kitchen faucet to treat water for drinking and cooking. However, if the contaminant is also hazardous when you get it on your skin or inhale it, for example, a volatile organic compound or radon, you will need to treat all the water entering the house, point-of-entry (POE). POE treatment devices are typically installed in the basement after the water pressure tank. Many treatment units are available in both POU and POE models, including granular activated carbon filters, reverse osmosis, and microfiltration units.
The consumer must be certain that enough treated water will be produced for everyday use. For example, distillation units produce 3- 12 gallons of treated water daily depending on the model. In addition, the maximum flow rate of the treatment device should be sufficient for the peak home use rate. Consider installing a flow water meter to help determine what the peak home water use is.
The consumer must watch for hidden costs such as separate installation fees, monthly maintenance fees, or equipment rental fees. Additionally, the disposal of waste materials, such as spent cartridges from activated carbon units and used filters, can add to the cost of water treatment and should be figured into the purchase price. You may be able to install some treatment devices on your own. Ask the dealer for all costs involved in the installation and maintenance of the treatment system.
Regardless of whether you or your dealer provides the service, there is a cost. Filter cartridges must be changed, materials added as needed, and the water tested regularly to be sure things are working properly. Unserviced equipment may contribute to increased levels of some contaminants. Find out what supplies and equipment are needed, and the expected costs. Determine how often a filter membrane, ultraviolet light, or media will need to be changed and who is responsible for doing this. Ask the dealer if there are any other water quality conditions, like pH or sediments that can affect the effectiveness of the treatment system.
The cost of treated water in the home will vary depending upon the cost of electricity and the amount of energy required to operate the treatment unit. Ask about average monthly electrical use for the system you are interested in purchasing.
Many units have backup systems or shutoff valve functions to prevent consumption of untreated water.
Testing the water a month after the equipment is installed will assure the homeowner that the unit is accomplishing the intended treatment. Have the test completed at a state certified laboratory. Additionally, water used for outside purposes should not have to be treated. This will provide you with a raw water tap, which can be periodically tested to compare the effectiveness of your treatment system. Water test results from the raw water tap will also help you to assess changes in your water quality.
The warranty may cover only certain parts of a device. The consumer should be aware of the warranty conditions.
The consumer should be aware that some water treatment equipment works by adding something to your drinking water to remedy the problem at hand. For example, some water softening units will replace the iron removed from the water with sodium.
These guidelines are for individuals planning to consult a water treatment industry representative. It must be emphasized that treatment can be for aesthetic as well as health factors. If drinking water poses a health risk, the consumer should consider the cost of purchasing bottled water or tying into a public water system, if available, as an alternative to treatment.
Water Treatment Devices for Common Contaminants and Undesirable Minerals Contaminant and Minerals Treatment Devices UV Light Ion Exchange Mechanical Filter Activated Carbon Activated Alumina Reverse Osmosis Distillation Aeration Chlorination Bacteria and Viruses ♦ ♦ Taste and Odor ♦ ♦ ♦ Lead ♦ ♦ ♦ ♦ ♦ Nitrate ♦ ♦ ♦ Chlorine, Trihalomethanes ♦ Radon ♦ ♦ Hardness ♦ VOCs and other Organics ♦ ♦ Pesticides, PCBs ♦ ♦ Iron and Manganese ♦ ♦ ♦ Sulfate ♦ ♦ ♦ Giardia and Crytosporidium Cysts ♦ ♦ ♦ Sediment, Turbidity ♦ Total Dissolved Solids ♦ ♦ Aluminum ♦ ♦ Arsenic ♦ ♦ ♦ Barium ♦ ♦ ♦ Cadmium ♦ ♦ ♦ Chloride ♦ ♦ Chromium ♦ ♦ Copper ♦ ♦ Fluoride ♦ ♦ ♦ Mercury ♦ ♦ Radium ♦ ♦ ♦ Selenium ♦ ♦ ♦ Silver ♦ ♦ Zinc ♦ ♦Adapted from Citizen’s Guide to Home Drinking Water Treatment Devices, Commonwealth of Pennsylvania Department of Environmental Protection, Bureau of Water Standards and Facility Regulation, P.O. Box 8467, Harrisburg, Pa 17105-8467. 10/2005
Advantages and Disadvantages of Home Water Treatment Devices Device and Cost Advantage DisadvantageActivated Carbon Filter:
Point-of-Use activated carbon filters cost between $100 and $500. Replacement filters cost $30 to $50.
Point-of-Entry treatment devices cost between $750 and $1,500. Replacement filters cost $300 to $500.
Effective at removing a wide range of organic contaminants such as VOCs and pesticides.
Carbon block and precoat designs have been validated as effective for lead reduction.
Often effective for reducing taste and odor problems.
Does not use electricity or generate wastewater.
Not effective at removing inorganic materials such as hardness, iron, nitrate or fluoride.
Bacteria growth may occur in the carbon filter if not maintained properly.
May require post-disinfection.
Reverse Osmosis:
Under the sink devices including a mechanical prefilter and an activated carbon post filter cost $500 to $1,500. Replacement membranes cost $50 to $150.
Can remove a wide variety of inorganic and organic contaminants including lead, nitrate and sodium.
Normal household water pressure provides good performance.
Uses from three to five gallons of water for each gallon produced.
Some membranes are damaged by chlorine.
Ion Exchange:
From $500 to $1200 depending on the resin and type of equipment. Cation exchange resins cost less than Anion exchange resins.
Cation Exchange Units
Effective for removing minerals such as hardness, barium, radium, nitrate, sulfate, calcium and magnesium. Effective for removing iron (if concentrations do not exceed 1 mg/L).
Anion Exchange Units
Effective for removing nitrates, bicarbonate, selenium and sulfate.
Removes one type of ion replacing it with another, i.e. sodium replaces with iron.
Requires backwashing and regeneration (usually with sodium chloride or potassium chloride).
Microfiltration:
Use-device mechanical particulate filters typically cost between $50 and $200 Filter replacements cost $20 to $60.
Effective for removing suspended particles such as rust, dirt and sediment. Filters tested and approved for Giardia and Cryptosporidium cysts are available. Not effective for removing dissolved contaminants such as lead, nitrate, VOCs, etc.Distillation:
Between $150 and $700 for a countertop model.
Removes the greatest variety of contaminants.Uses approximately three kilowatts of electricity per gallon of water.
Water-cooled units waste a considerable amount of water.
Will require frequent cleaning, especially where the water is hard.
Removal of minerals may leave bland taste to the water.
Process is slow.
Aeration:
Between $3,000 and $4,500.
Effective for removing radon and volatile organic chemicals.Expensive to purchase and install.
Requires secondary pumping and pressurization.
Ultraviolet Light:
Between $300 and $700.
Effective for destroying bacteria and Giardia and Cryptosporidium cysts. Not effective for virus removal.Activated Alumina:
Same as Activated Carbon.
Effective for removal of arsenic, fluoride and lead. Does not use electricity and does not waste water. Will usually not remove minerals other than those listed.Chlorination:
Between $800 and $1,500.
Only effective way of dealing with large amounts of iron, hydrogen sulfide and colloidal iron.
It is an excellent disinfectant.
Requires handling and storage of hazardous chemicals.
Requires time to insure that chemicals are mixed properly and available when needed.
Adapted from Citizen’s Guide to Home Drinking Water Treatment Devices, Commonwealth of Pennsylvania Department of Environmental Protection, Bureau of Water Standards and Facility Regulation, P.O. Box 8467, Harrisburg, Pa 17105-8467. 10/2005
The purchase of water treatment equipment is a decision that must be carefully considered. Whether the purchase is being made to improve the aesthetic characteristics of the water or to address health considerations, many factors must be determined. You may want to keep a logbook, allowing you to keep track of all maintenance and repairs on your treatment system. The following are some key steps in selecting equipment:
Center for Agriculture Food and the Environment
This fact sheet is one in a series on drinking water wells, testing, protection, common contaminants, and home water treatment methods available on-line
and Cape Cod Cooperative Extension: 508-375-6699
http://www.capecodextension.org
MA Dept. of Environmental Protection, Division of Environmental Analysis
Offers assistance, information on testing and state certified laboratories: 617-292-5770
For a listing of MassDEP certified private laboratories in Massachusetts
U.S. Environmental Protection Agency, New England Office
Information and Education on where drinking water comes from; drinking water testing and national laws; and how to prevent contamination
US Environmental Protection Agency
For a complete list of primary and secondary drinking water standards
MA Department of Conservation and Recreation, Division of Water Supply Protection
Maintains listing of registered well drillers, information on well location and construction: 617-626-1409,
NSF International
The NSF International has tested and certified treatment systems since 1965. For information on water treatment systems: 800-NSF-MARK
Water Quality Association
The Water Quality Association is a not-for-profit international trade association representing the household, commercial, industrial, and small community water treatment industry.