Inconel Alloys supplier and material Price/ Grades

Finding Inconel distributors near you? Stockist & supplier of Inconel alloys, view all grades at a glance with ASTM standard specification and equivalent chart

The name Inconel steel applies to all nickel chromium based austenitic steels. These are superalloys of chromium and nickel. They perform extremely well under high pressure and high temperature environments. They are very much resistant to oxidation corrosion and therefore could be used in oxidation prone applications. Like the weathering steel, Inconel material also forms an oxide layer upon first contact with oxidizing agents and then oxide layer prevents from further corrosion due to oxidation. Thermally induced crystal vacancies are less or absent in Inconel material which make them applied in high temperature environments where ordinary steel or aluminum would not stand. The Inconel density changes with the different grades of the material. There are different grades designated by numbers such as 600, 617, 625, 690, 718 and X750. The Inconel 600 for example has 8.47 grams per centimeter cube of density. These are developed through different methods. Depending on the grade, they could be formed either by solid solution strengthening or precipitation strengthening methods. The gamma double prime forming cubic crystals avoid the creep in elevated temperatures. For this purpose, niobium is added in some precipitation strengthening grades. Due to the rapid hardening of the material, cold working is not possible. Also, machining is difficult on these materials. There are special tools and procedures involved in the machining of this material to avoid the plastic deformation of the material or the tools. The Inconel price is competitive and we can provide you with a comprehensive price list upon request. There are different grades of the Inconel alloy that are used in different industries and applications. The Inconel x-750 is used mostly in gas turbine components such as blades, seals and rotors. There are different Inconel applications but mostly in the aviation, space and gas industries. The different Inconel grades can be used for different purposes.

For more information, please visit types of inconel.

Inconel Alloy Products

Inconel price per kg

Inconel Alloy US $10/Pound

Inconel Grades

Inconel ASTM Standard & Specification

Products Available Shapes

International Standard

Bar

ASTM B 446/ASME SB 446, ISO , VdTÜV 499, BS NA21, EN , DIN , ASME Code Case , SAE/AMS ,

Wire

DIN , SAE/AMS , ISO

Sheet / Plate

ASTM B 443/ASTM SB 443,ISO , VdTÜV 499, BS NA21 (Sheet, Plates), EN , DIN , ASME Code Case , SAE/AMS & & MAM ,

Pipe / Tube ASTM B444/ B829, ASME SB 444/ SB 829 (Seamless), ASME SB 704/SB 751 and ASTM B704/B 751 (Welded), ASME SB 705/ SB 775 and ASTM B705/B 775 (Welded), VdTÜV 499, BS NA21 (Seamless), ISO , SAE/AMS (Seamless & Welded), DIN , ASME Code Case .

Pipe Fittings (Buttweld)

ASTM B 366/ ASME SB 366

Forging/ Forged Items

If you want to learn more, please visit our website single wire method safety wire.

ASTM B 564/ ASME SB 564, DIN , ISO

Welding Wire

A5.14 ERNiFeCr-2

Heat Resisting Steels & Alloys DIN , ISO A

Inconel Alloy Temperature Range

Inconel 600 Heat Capacity units

Metric: 0.444 J/g-°C
English: 0.106 BTU/lb-°F

Inconel 625 Heat Capacity units Metric: 0.41 J/g-°C
English: 0.098 BTU/lb-°F

Inconel Applications & Uses

• Aerospace industries
• Marine applications
• Sea-water applications
• Jet Engine Components
• Commercial Gas Turbines
• Food Processing
• Chemical Processing
• Cryogenic Storage Tanks
• Power generation
• Nuclear reactors
• Gas turbines
• Pressure vessels

Inconel Alloy Composition

Inconel Element, proportion by mass (%) Ni Cr Fe Mo Nb & Ta C Co Cu Mn Al Ti Si S P B 600 &#;72.0 14.0&#;17.0 6.0&#;10.0 &#;0.15 N/A &#;0.5 &#;1.0 &#;0.5 &#;0.015 617 44.2&#;61.0 20.0&#;24.0 &#;3.0 8.0&#;10.0 0.05&#;0.15 10.0&#;15.0 &#;0.5 &#;0.5 0.8&#;1.5 &#;0.6 &#;0.5 &#;0.015 &#;0.015 &#;0.006 625 &#;58.0 20.0&#;23.0 &#;5.0 8.0&#;10.0 3.15&#;4.15 &#;0.1 &#;1.0 &#;0.5 &#;0.4 &#;0.4 &#;0.5 &#;0.015 &#;0.015 690 &#;58 27&#;31 7&#;11 &#;0.05 &#;0.50 &#;0.50 &#;0.50 &#;0.015 Nuclear grade 690 &#;58 28&#;31 7&#;11 &#;0.04 &#;0.10 &#;0.50 &#;0.50 &#;0.50 &#;0.015 718 50.0&#;55.0 17.0&#;21.0 Remainder 2.8&#;3.3 4.75&#;5.5 &#;0.08 &#;1.0 &#;0.3 &#;0.35 0.2&#;0.8 0.65&#;1.15 &#;0.35 &#;0.015 &#;0.015 &#;0.006 X-750 &#;70.0 14.0&#;17.0 5.0&#;9.0 0.7&#;1.2 &#;0.08 &#;1.0 &#;0.5 &#;1.0 0.4&#;1.0 2.25&#;2.75 &#;0.5 &#;0.01

Properties of Inconel

Products Hardness, Rockwell Form and Condition Yield Strength Tensile Strength Elongation % ksi MPa ksi MPa Bars 65-85B Cold drawn Annealed 25-50 170-345 80-100 550-690 55-35 Plates 65-85B Hot rolled Annealed 30-50 205-345 80-100 550-725 55-35 Sheets 88B max Cold Rolled (CR) Annealed 30-45 205-310 80-100 550-690 55-35 Pipe/ Tubes 88B max Cold Drawn Annealed 25-50 170-345 80-100 550-690 55-35 Wires - Cold Drawn Annealed 35-75 240-520 80-120 550-830 45-20 Wires - Cold Drawn No 1 Temper 70-105 480-725 105-135 725-930 35-15 Wires - Spring Temper 150-210 - 170-220 - 5-2 Bars/ Rods &#; 287 HB Annealed 60 414 120 827 30 Sheet 145-240 Annealed 60 414 120 827 30 Tube - Annealed 60 414 120 827 35

Inconel Melting Point

Inconel has a higher melting point of 2,540°F-2,600°F (1,390°C-1,425°C), check below the grade wise melting range.

Inconel 718 Melting Point Range Solution Treated: - Deg F
Solution Treated and Aged: - Deg C Inconel 601 Melting Point Range Deg C ( Deg F) Inconel 600 Melting Point Range Metric:  - Deg C
English:  - Deg F Inconel 625 Melting Point Range - Deg F ( - Deg C)