Stucco netting, also known as plaster mesh, normally refers to hexagonal mesh woven wire netting for construction uses. This metal wire netting has normal aperture of 1'' and 2', made from galvanized wire gauge 22- 20. Galvanised stucco lathing hex netting is reverse twist weave to keep high standards, uniform mesh hole, roll out flatness and dimensional stability. It is supplied in woven wire rolls of various length of 25', 50', 75', 150', or 455', with red markings every 6". Stucco netting can be supplied cut into steel mesh sheets of certain length. It find popular applications in constructions as building materials: reinforcement of first coat stucco system, backing for masonry veneer, ceramic tile and cement plastering, and EIFS lathing and insulation system.
General Introduction:
Wusheng Hardware supply professional and honest service.
Material: Galvanized Steel Wire.
Wire Diameter: BWG 22-20.
Roll width: 12'', 24'', 36'', 48'', 60'', 72''.
Roll length: 25', 50', 75', 150', or 455"
Popular aperture: 1'' and 2''.
Weight: 9kg-48kg or as required.
Woven Method: Straight & Reverse Twist.
Feature: Galvanized before weaving. Commercial grade zinc coating to resists rust and corrosion. Reverse twist weave designed to keep high standards, uniform mesh hole, stay flat and dimensionally stable.
Varieties :
Non-fur Stucco Netting, Galvanized Mesh Woven in Rolls;
Paperback Stucco Netting Woven 17 gauge /Building Paper Backing;
Self-furred Stucco Netting;
Stucco Hexagonal Netting 20G, Galvanized Woven.
Galvanised stucco mesh is extensively used in building as backing and reinforcement for plaster, masonry veneer and ceramic tile in construction of the roof, floor and exterial wall insulation construction.
Hexagonal mesh reverse twist weave of 20 gauge (0.89mm) galvanized steel wire. It is furred on center horizontally and vertically, respectively.
Self-Furred, 20 gauge, 1 inch, zinc coated, galvanized steel woven stucco netting meeting EIFS lathing requirements, furred vertically for plastering of cement exterior wall coatings.
Paperback Stucco Netting
Zinc coated, galvanized woven hexagonal netting with water vapor permeable paper backing.
It is designed for use as reinforcement for cement, plaster, masonry veneer and ceramic tile. Self-furring woven wire hexagonal mesh in rolls, formed with a twist of galvanized steel wire.
Specifications:
Material: Galvanized Steel Wire
Wire Diameter: BWG 22-20
Mesh Roll Width: 12'', 24'', 36'', 48'', 60'', 72''
Roll length: 25', 50', 75', 150', or 455'
Stucco netting aperture: 1'' and 2''
If you are looking for more details, kindly visit Stucco Wire Netting.
Roll weight: 9kg-48kg or as required
Woven Method: Straight & Reverse Twist
Feature: Galvanized before weaving. Commercial grade zinc coating to resists rust and corrosion. Reverse twist weave keep high standards, uniform mesh hole, roll out flatness and dimensional stability.
Fabricated process:
Drawn Wire ---> Galvanized ---> Woven---> Packing
Packaging Detail: in 20'/GP and 40'/GP, coil in skin packing, carton box, wooden box or as your required.
Options of Stucco Wire Meshes:
Besides hexagonal mesh, we also supply welded mesh and expanded mesh used for wall plastering mesh uses.
Light Type Small Hole Galvanized Welded Wire Fabric Plaster Mesh:
Galvanized Steel Expanded Diamond Mesh for Stucco System Uses:
For more Dimpled Lathinformation, please contact us. We will provide professional answers.