Double wire fence is a kind of heavy weight fence products in Skyhall fence series. Normally we need at least two staffs during standing up the fence panel. The installation process of double wire fence is also not too complex. We can follow the normal process of metal fence installation. We will give an example of 2.5 linear meter width double wire fence installation process.
Boya contains other products and information you need, so please check it out.
1.Measure the width on the ground for 2.5 linear meter, then dig holes on the ground. If need to speed up, we can dig all holes together when we calculate the distant correctly. If the ground is concrete, please do not dig holes for post.
2.Setting up the post into the holes and fill the earth into the holes to make sure the post will not move even we move it. The post must be installed very stable, or it won&#;t be able to afford the heavy weight of the double wire fence panel. If the ground is concrete and the post comes with base flange plate, please set up the anchor bolts into the concrete ground.
The company is the world’s best Double Wire Mesh Fence supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
3.Standing up the panel close to the post. Usually we need two staffs to stand the double wire fence up because of the heavy weight. Need to make sure the spacing from post to double wire fence panel is correct for setting up the clamps.
4.Connecting the post and panel with metal clamps, normally the spacing of two clamps are 400mm ~ 600mm. The clamp need to be set up on the top of the mesh to hang the weight of the double wire fence panel.
5. Install the rain cap on the top of the post. If the height is difficult to reach the top, we can set up the post cap first before setting up the post.
If you are looking for more details, kindly visit Airport Security Fence.