Goto sibaide to know more.
barbed wire, fence wire usually consisting of two longitudinal wires twisted together to form cable and having wire barbs wound around either or both of the cable wires at regular intervals. The varieties of barbed wire are numerous, with cables being single or double, round, half-round, or flat and having a range of gauges. The twisted double cable provides extra strength and permits contraction and expansion without breakage. Barbs are diagonally cut in order to provide sharper points; they may consist of one or two pieces (two or four points) and are generally spaced at intervals of 4 to 5 inches (10 to 13 cm).
The first patents on barbed wire were taken out in the United States in , but it was not until , when Joseph Glidden of De Kalb, Ill., invented a practical machine for its manufacture, that the innovation became widespread. By , fenced pastureland had virtually replaced the open range in the western United States.
Prior to , several individuals created forms of fencing that could be considered as barbed wire. None of these creations ever reached the mass market. In by Michael Kelly developed a type of fence with points affixed to twisted strands of wire.
Had his invention been properly promoted, he could have gained distinction as the Father of Barbed Wire. It wasn't until ten years later that another inventor filed a patent that would spark the development of the barbed wire industry.At the county fair in DeKalb, Illinois in , Henry M. Rose had on exhibit a new idea in fencing. It was a wooden rail with a series of sharp spikes protruding from the sides of the rail. The fence rail, patented earlier that year on May 13, was designed to be attached to an existing fence to "prick" an animal when it came into contact with the rail and keep livestock from breaking through.
This fence attracted the attention of each of the three men, Joseph Glidden, Jacob Haish, and Isaac Ellwood. Each man had the idea to improve upon Rose's fence by attaching the spikes (barbs) directly to a piece of wire. Each went their separate ways to work on an invention that would soon bring them together.
Legend states that Glidden's wife Lucinda encouraged him with his idea to enclose her garden. Glidden experimented by bending a short wire around a long strand of straight wire, by modifying a coffee mill. Two pins on one side of the mill, one centered and the other just enough off center to allow a wire to fit in between. When the crank was turned, the pins twisted the wire to form a loop. The wire was then clipped off approximately one inch on each end at an angle to form a sharp point. Barbs were placed on one of two parallel strands of wire. The two strands of wire were attached to a hook on the side of an old grinding wheel. As the barbs were positioned, the wheel was turned twisting the two strands of wire and locking the barbs in place.
During this time, Isaac Ellwood, a hardware merchant, had been unsuccessful in perfecting his own version of barbed wire. When Joseph Glidden was awarded a patent on November 24, for his creation known as "The Winner," he and Ellwood formed a partnership to establish The Barb Fence Company.
Are you interested in learning more about 358 mesh panels manufacturers? Contact us today to secure an expert consultation!
Jacob Haish also had patented his own wire by this time but had not made a serious attempt to promote and sell it. Haish, wanting the credit for barbed wire himself, didn't like the idea of Glidden and Ellwood forming a partnership and strived to bring them down. When Haish learned that Glidden had applied for a patent in late , but was denied, Haish filed a patent for his creation, the "S-Barb" in July of . A few days later he filed interference papers against Glidden and an intense legal dispute ensued. Even though Haish was awarded a patent first, Glidden won the dispute because he had filed his patent before Haish. Unwilling to admit defeat, Haish claimed the title of "the inventor of barbed wire." Nevertheless, it was Joseph Glidden who became known as the "Father of Barbed Wire."
Kansas Fence Laws
With miles of fences being constructed daily, there arose a need to define a lawful fence. In Kansas, lawmakers debated the issue and wrote legally binding definitions of proper fencing. When cropland adjoined land used for grazing, the statute of Kansas placed the burden on the landowner to fence out cattle lawfully at large. This determination was based on free range grazing laws which permitted cattle to graze unrestrained. Although the farmer was responsible for constructing the fence, he was afforded many advantages provided the fence met established criteria.
If an animal breached a fence, and trespassed upon cultivated or other fenced land, the animal's owner was deemed responsible for the damage. The law further granted possession of the animal to the landowner until such time as he was properly compensated.
Railroads and Barbed Wire
Railroads were required to construct a legally defined fence along the right-of-way wherever tracks crossed lawfully fenced private land. Railroads did not receive the same benefits granted to landowners, however. They were exempted from rights of recourse (as given to landowners) when livestock trespassed upon their right-of-way.
Another problem was that neighboring farmers and ranchers started to "borrow" wire from railroad fences for their own use. With the enormous number of barbed wire fences being legitimately sold, it was almost impossible to find the thief and recover the stolen wire. To combat the problem, unique variations of "The Winner" were created exclusively for railroad use. The design consisted of one or more square strands of wire woven among one or more traditional round lines. For many years, railroad companies were principal customers of The Barb Fence Company. Once again barbed wire had struck a victory in the quest to settle the untamed West.
Recommended Readings
The Wire That Fenced the West, by Henry D. and Frances McCallum, University of Oklahoma Press, (out of print).
The Bobbed Wire Bible IX, by Jack Glover, Cow Puddle Press, .
Barbed Wire Identification Encyclopedia - Third Ed.,by Harold Hagemeier, DRM Publishing Co.,
Barriers - An Encyclopedia of United States Barbed Fence Patents,by Campbell and Allison,